Seamless Alloy Steel Pipe
Stainless Steel Seamless Pipe
Seamless Carbon Steel Pipe
SS Welded Tube
Stainless Steel Sheet Plate
Stainless Steel Coil Strip
Stainless Steel Bars
Stainless Steel Wire Rod
Carbon Steel Plate
Carbon Steel Coil
Carbon Steel Tubes
Carbon Steel Bar
Carbon Steel Wire
Galvanized Steel Products
Alloy Steel Products
Free Cutting Steel Bar
EduardoThe coil was packaged very well and shipped fast.The product fits the descripton. Thinking about purchasing again.Really a great product. I have tried other products and this by far is the best money I have spent.
DavidFirst time we import a big project from China, excellent for service And really professionnal. My goods have been received, the products are not damaged at all.The quality and workmanship are very good, the materials are also very good, I am very satisfied. recommand them!
Large Diameter Seamless Alloy Steel Pipe Sch40 4140 Seamless Tubing A106 A53 Gr B
|Product Name||Alloy Steel Pipe||Standard||ASTM,ASME,API|
|Type||Hot Rolled,Cold Drawn,NPS||Pipe End||Plain End,Beveled End,Treaded|
large diameter seamless steel pipe ASTM A355 P21,
sch40 seamless steel pipe ASTM A355 P21,
a 53 gr b ASTM A355 P21
ASTM A213 Grade T9 Seamless Alloy Steel Pipe
ASTM A213 is the standard specification for seamless ferritic and austenitic alloy-steel boiler, superheater, and heat-exchanger tubes. Grade : T2, T5, T5b, T5c, T9, T11, T12, T17, T21, T22, T23, T24, T36, T91, T92, T122, and T911. The tubing sizes and thickness usually furnished to this specification are 1/8″(3.2 mm) in inside diameter to 5″(127 mm) in outside diameter and 0.015″ to 0.500″(0.4-12.7 mm) in minimum or average wall thickness. ASTM A213 tubes of custom-diameter may be furnished, provided such tubes comply with all other requirements of the standard specification.
|Standard||Low-Alloy Steel Grade|
T2 T5 T5b T5c T9 T11 T12 T17 T21 T22
T23 T24 T36 T91 T122 T911
The addition of Molybdenum (“Moly”) increases the strength of the steel and its elastic limit, enhance the steel resistance to wear, its impact qualities, and the hardenability. It also improves the resistance to softening, makes chromium steel less prone to embrittlement and prevents pitting.
Chromium, a key element also for stainless steel alloys, prevents steel oxidation at elevated temperatures and increases the resistance of steel to corrosion. It enhances the tensile, yield, and hardness properties of low-alloy pipes at room temperatures.
Other alloying elements, present in various degrees in pipes of all grades are:
- Aluminum: decreases oxygen from steelmaking
- Boron: used to produce fine grain size and enhance steel hardness
- Cobalt: used to enhance the steel’s heat and wear-resistance
- Manganese: gives better steel hardenability
- Nickel: Enhances toughness, hardenability and impact strength at low temperatures
- Silicon: decreases oxygen, enhances hardenability and toughness
- Titanium: prevents precipitation of chromium carbide
- Tungsten: refines steel grain size and enhance the steel hardness, especially at high temperatures
- Vanadium: gives steel enhanced fatigue resistance
As mentioned, low-alloy steels have a total amount of alloying elements below 5%; high alloy steel has a higher percentage of these elements.