-
Seamless Alloy Steel Pipe
-
Stainless Steel Seamless Pipe
-
Seamless Carbon Steel Pipe
-
SS Welded Tube
-
Stainless Steel Sheet Plate
-
Stainless Steel Coil Strip
-
Stainless Steel Bars
-
Stainless Steel Wire Rod
-
Carbon Steel Plate
-
Carbon Steel Coil
-
Carbon Steel Tubes
-
Carbon Steel Bar
-
Carbon Steel Wire
-
Alloy Steel Sheet
-
Alloy Steel Coil
-
Alloy Steel Bar
-
Alloy Steel Wire
-
EduardoThe coil was packaged very well and shipped fast.The product fits the descripton. Thinking about purchasing again.Really a great product. I have tried other products and this by far is the best money I have spent.
-
DavidFirst time we import a big project from China, excellent for service And really professionnal. My goods have been received, the products are not damaged at all.The quality and workmanship are very good, the materials are also very good, I am very satisfied. recommand them!
Plain End Din 17175 St35.8 Cold Drawn Seamless Steel Tube Cs

Contact me for free samples and coupons.
Whatsapp:0086 18588475571
Wechat: 0086 18588475571
Skype: sales10@aixton.com
If you have any concern, we provide 24-hour online help.
xProduct Name | Carbon Steel Pipe | Standard | DIN 17175 |
---|---|---|---|
Grade | St35.8 | Type | Seamless Pipe(SMLS) |
Thickness Schedule | STD, 40, XS, 80, XXS, 160 | Pipe End | Plain End,Beveled End,Treaded |
High Light | din 17175 cold drawn seamless steel tube,st35.8 cold drawn seamless steel tube,plain end cs seamless pipe |
Standard:DIN 17175 : Seamless Steel Tubes For Elevated Temperatures
As far as DIN 17175 is concerned, steels that have a good mechanical properties at a higher temperature, up to 6 00 °C, and even under long-term load, are called heat-strength steels.
DIN 17175 St35.8 Seamless Steel Tubes can be used to manufacture steam boilers, pipes, pressure vessels and instruments operating at temperatures up to 600 ° C and at high temperatures.
ST35.8 STEEL PIPE MECHANICAL PERFORMANCE
Grade | C | Si | Mn | P | S | Cr | Mo |
St35.8 | ≤0.17 | 0.10-0.35 | 0.40-0.80 | ≤0.040 | ≤0.040 | / | / |
St45.8 | ≤0.21 | 0.10-0.35 | 0.40-1.20 | ≤0.040 | ≤0.040 | / | / |
15Mo3 | 0.12-0.20 | 0.10-0.35 | 0.40-0.80 | ≤0.035 | ≤0.035 | / | 0.25-0.35 |
13CrMo44 | 0.10-0.18 | 0.10-0.35 | 0.40-0.70 | ≤0.035 | ≤0.035 | 0.70-1.10 | 0.46-0.65 |
10CrMo910 | 0.08-0.15 | ≤0.50 | 0.40-0.70 | ≤0.035 | ≤0.035 | 0.20-0.25 | 0.90-1.20 |
ID TOLERANCE:
Project | Standard | Size range | Tolerance | |||
Outer diameter | DIN17175 | Hot rolled steel pipe | OD ≤ 100mm | ± 0.75%( Min ± 0.5mm ) | ||
OD> 100~ 320mm | ± 0.9% | |||||
Cold drawn steel pipe OD ≤ 120mm | ± 0.6%( Min ± 0.25mm ) | |||||
Wall thickness | DIN17175 | OD ≤ 130mm | WT ≤ 2Sn | +15%~-10% | ||
WT > 2Sn~4Sn | +12.5%~-10% | |||||
WT > 4Sn | ± 9% | |||||
130 < OD ≤ 320mm | WT ≤ 0.05OD | +17.5%~-12.5% | ||||
0.05OD < WT ≤ 0.11OD | ± 12.5% | |||||
WT > 0.11OD | ± 10% |
ST35.8 STEEL PIPE DELIVERY CONDITION
1. NBK(+N)
after cold forming, eventually above phase transition point, in a protective atmosphere of annealing oxidation medium
2. GBK(+A)
after cold forming, annealing in non oxidizing medium protective gas
3. BK(+C)
the final heat treatment after cold forming, therefore small steel pipe plastically, the plastically degree does not guarantee
4. BKW(+LC)
after final heat treatment, a tiny cold drawing deformation, continue again when machining steel pipe allowed inside certain limits cold deformation(bending, flaring)
5. BKS(+SR)
have a stress relief after cold forming, heat treatment, steel pipe can be carried out within a certain limit in the appropriate processing again
ST35.8 STEEL PIPE SUPPLY STATUS
The 17175 St35.8 Seamless Steel Tubes Will be delivered through a suitable heat treatment. heat treatment includes:
- Normalizing
- Annealing
- Tempering; from the quenching temperature, it is not cold, but then tempered
- Adjust the mass by the isothermal transformation method.
Original material test
A thin sheet should be taken at the top end of each round or square bar ingot for a pickling test to determine if the top end is adequately cut. Ultrasonic testing can also be performed on the shrinkage hole as selected by the supplier.
Test:
- Chemical composition verification test
- hydrostatictest
- Tensile test
- Notched impact test
- Yield strength test
- Ring test
- Nondestructive testing